signs you have worn out boots

5 Signs You Have Worn Out Work Boots

Wearing a good pair of work boots is crucial to ensure safe and healthy feet. These boots are specially designed for construction workers, firefighters, and police officers.

Boots help keep feet protected from injury and shock even in unfavorable environmental conditions. But since nothing is permanent, they tend to lose their integrity after a certain period.

As a result, the boots can become damaged pretty fast, and you will feel the effects. Worn-out or damaged boots can cause cracks, soles coming out, and even cause pain and blisters.

In some cases, the damage to your boots won’t be noticeable. For that, here we will talk about five signs worn out of your work boots.

Read Also: How Often Do I Change Insoles for Work Boots?

Why Should You Replace Your Work Boots?

Work boots don’t come with a limitless lifespan. Even sometimes, well-built boots will require to be replaced after a certain time.

As these boots are usually worn in hazardous environments, the boots damage quickly. For that, they do not support the feet as much as before. Wearing such unsupported boots can cause you various problems. 

For example, the sole comes out anytime while working and starts cracking on your feet. Besides, hardened leather can cause pain and blisters on your feet.

If you are working in watery places wearing damaged boots, water can penetrate through cracks and wet your feet. This will make you awkward working with wearing such boots. The color of your boots replaced with dull colors will make you look dirty. 

In addition, wearing common boots on paving asphalt will not be enough to ensure feet’ safety. This is because workers have to do risky work such as soil excavation, sub-base preparation, and asphalt installation. Such work requires wearing the right asphalt paving boots that provide maximum feet protection.

Otherwise, there is a high possibility of getting serious injuries on the feet.

Read Also: How Should Work Boots Fit?

Signs You Have Worn Out Work Boots

signs of worn out work boots
worn out boot

Sometimes the damages to working boots are not visible. In that case, you will have to follow some tricky techniques. Regarding this, here we have explained five signs that will help you know you have worn out work boots.

1. Damaged Or Worn Out Outsoles

The outsole of the work boots is the only part that directly contacts the ground. If the boots are worn on rough terrain, they get rubbed against the surface.

As a result, the outsole gets damaged quickly. If so, you will notice lint on the outer sole that causes cracks or holes in the boots. Sometimes cracks will not be visible.

So you will need to pay serious attention to find the spots of tearing on the boots. If you find any punctures or holes, it’s time to replace your boots.

2. Damaged Midsoles

Insoles and outsoles are connected by midsoles that are often made of thick EVA foam. This foam helps to absorb the force when you walk. Regular use of work boots can start to lose shape quickly.

For that, the boots are compressed over time which creates a wrinkled look. When this happens to your boots, you will notice that the height you get while wearing your boots is reduced.

This part is very important to offer overall comfort to your feet. Once the boots get damaged or worn out, you will feel pressure on your legs and joints. Besides, sometimes you may feel pain after the end of the day.

Read Also: EVA sole vs TPR Sole: Which is Better?

3. Having Much Flexibility

Getting proper flexibility from your work boots is essential because that helps to give you maximum foot support and a better grip on your feet. To test the flexibility of your boots, fold the boots and bend the toes at the ankles.

After releasing the fold, if the boots go back to the prior position, the boots have ideal flexibility, otherwise not. Also, increasing flexibility means that the sole of your boot is not providing you with adequate support and protection.

Chances are, the boot isn’t doing much to absorb the shock. It can cause pain when exposed to a sharp object.

4. Separate Uppers

With constant flipping of the outer sole, the upper part of your work boot can be separate. This damage can be hazardous for your feet.

The more neglected the separation, the worse it will be. Eventually, it can scratch all the way back to your stress. Although an adhesive can be used to stick to two parts, it may not offer a long-term solution.

Besides, flapping soles will fold under your feet, causing a dangerous fall. If you work with such boots, it could do more harm than good.

Read Also: Top 10 Slip-Resistant Skechers for Work

5. Holes and Physical Damage 

Tears, holes, and other apparent signs of physical damage indicate that your work boots are worn out. Although the upper part of your body can be compromised, even a tiny hole can put you at risk. Also, if you work in the vicinity of chemicals, extreme heat, or electricity, you are putting yourself at even greater risk. In that case, a small hole can cause significant issues. 

Tips To Expand The Lifespan Of Your Work Boots

Signs of worn out boots

Although most work boots last around one year, you can expand that lifespan in some easy ways. Here, we have explored some simple tips that will allow you to receive the most out of your investment. 

Cleaning Regularly

It is hard to find anyone who cleans boots after a tough day. This can be a reason your work boots don’t last very long. Leaving your boots with dirt, grime, and mud can easily damage their integrity. So, you have to clean work boots regularly to keep them in good condition.

Related Post: 4 Effective Ways to Remove Layers of Old Polish from Work Boots

Use Water And Stain Repellent

Water not only stretches your work boot but also stains leather. For that, the boots’ stitching can tear out quickly and damage your boots.

You will need to have extra protection against water and oil stains. In that case, using water and stain repellent could be a good option for adding an extra layer to your boots. 

Use More Than One Pair

Investing in multiple pairs of boots will help you expand the lifespan of your boots. This is because regular use of a pair of boots will get much pressure that causes them to damage quickly. Using two pairs of boots can double their lifespan. Each pair of boots will encounter less damage over time.

Storing Boots

How you store your work boots also makes a good impact on their lifespan. Boots need to be stored in a place with dry and mild temperatures.

Otherwise, the materials of the boots can easily deteriorate. So, you will need to store your boots in a cool place with adequate air circulation. Use shoe tree if possible.

Read Also: 5 Creative Things to do With Your Old Shoes


Conclusion  

Regular use makes a pair of work boots lose their integrity, which quickly leads to damage to the boots. Wearing such damaged work boots is very uncomfortable, especially when you are at work. It also causes you to feel hip, knee, or back pain. 

So, it is crucial to replace the boots once you have noticed any worn out on your boots.

Sometimes, it will be challenging whether the boots are worn out. For that, we have discussed some techniques that will help you if your boots are damaged. Besides, following the tips explained in the section above, you can expand the lifespan of your boots.

Please Share. Thanks!

Leave a Comment

Your email address will not be published.

DMCA.com Protection Status